Product Description
EST 3 FDAS Panel
•Available in 5 and 10 zones
•CleanMe provides remote annunciation if a
detector drifts out of UL/ULC limits reducing
the chance of false alarm
•Combination of waterflow and supervisory
IDCs reduces wires and zone counts
•Front panel programmable simplifies installation and servicing
•On board relays for alarm, supervisory, and trouble
•One person walk test
Photoelectric Smoke Detector(700 series)
•intelligent, self-diagnostic
•Built-in drift compensation
•Photoelectric model has a field replaceable optical chamber
•Low-profile design
•Advanced false alarm immunity
•Interchangeable head and base design
•Widest two-wire compatibility listings
Rate of Rise Heat Detector
• UL listed for 50 ft. (15.2m) spacing
• Single pole — normally open contact
• Mounting flexibility with screw terminals
• On-site testing of rate-of-rise feature
• Positive operating indication — for fixed temperature element
Manual Pull Station(SIGA-270 Series)
•Traditional familiar appearance
•Intelligent device c/w integral microprocessor
•Non-volatile memory
•Automatic device mapping
•Electronic addressing
•Stand-alone operation
Horn Strobe(757 Series)
•UL 1971-listed synchronizing strobe
•Genesis-compatible
•Approved for public and private mode
•High dBA Output
•Multiple Output Taps, 25 or 70 Volt Models
•Field changeable field markings
Fire Alarm Bell
•mounts to standard 4" square electrical box
•wire lead design
•high quality micro-motor
•loud resonant tones
•low current draw
•6" (150 mm) size
•"fire red" finish
Reflective Beam Smoke Detector
•Coverage: 50R range 15 -160 ft (4.6 - 48.8 m);
100R range 160- 330 ft (48.8 - 100 m)
• Microprocessor controlled
• Automatic drift compensation
• Simple alignment
• Selectable alarm thresholds
• 24 Vdc operating voltage
• Latching or non-latching operation
• Low current consumption
• Optional Ground Level Test Station
Booster Power Supply
•Cost effective system expansion
•Provides for Genesis and Enhanced Integrity notification appliance synchronization
•Supports coded output operation
•Self-restoring over-current protection
•Multiple signal rates
•On-board diagnostic LEDs identify wiring or internal faults
•110 and 230 Vac models available
•Accommodates 18 to 12 AWG wire sizes
•Optional tamper switch
•Dual battery charging rates