ANSORL CONVENTIONAL

Category:

Product Description

 FDAS Panel(CFP series)

FDAS Panel(CFP series)

•2, 4, 8, or 16 conventional input zones.
•2 notification appliance circuits (NAC, Sounder)
•The panel comes with a 3 amp power supply.
•Dedicated alarm and fault relays.
•1 RS485 can be able to connect repeaters.
•Enclosure supports two 12V, 7Ah backup batteries.

  Photo Electric Smoke Detectors(SD102)

Photo Electric Smoke Detectors(SD102)

•Operating Voltage Range: 9 to 28 VDC Volts Non-polarized
•Standby Current: ≤60μA @ 24 VDC
•Maximum Alarm Current (LED on: ) ≤ 30mA @ 24 VDC

  Rate of Rise Heat Detector (HD105)

Rate of Rise Heat Detector (HD105)

•Operating Voltage Range: 9 to 28VDC Volts Non-polarized
•Standby Current: 60μA @ 24 VDC
•Installation Temperatures: -10°C to50°C
•Maximum Alarm Current (LED on: ) ≤ 30mA @ 24 VDC
•Fixed Temperature Rating: 57°C

  Combination Smoke and Heat Detector (HDSD109)

Combination Smoke and Heat Detector (HDSD109)

•Operating Voltage Range:9 to 28VDC Volts Non-polarized
•Standby Current:≤60µA @ 24 VDC
•Maximum Alarm Current (LED on: ) ≤30mA @ 24 VDC
•Smoke Sensitivity:1.06±.26%FT.
•Fixed Temperature Rating:135°F (57°C)
•Rate of Rise Detection:Responds to greater than 15°F/min

 Manual Call Point (MCP2D)

Manual Call Point (MCP2D)

•Rated voltage:12-24VDC
•Standby current:≤330uA (DC24V)
•Alarm Current:≤35mA (DC24V)
•Power Indicator: Green Led
•Alarm Indicator: Red Led
•NO/NC: Optional
•Products Sizes: 86x86x60mm

 Manual Pull Station (MCP05)

Manual Pull Station (MCP05)

•Operating Voltage Range:9~28VDC Volts
•Alarm Current:45 mA @ 24 VDC
•OperatingHumidityRange:10% to 93%
•Dimensions:Length140mm, Width105mm, •Depth45mm
•Weight:Net Weight220g

 Strobe Sounder (SSG03)

Strobe Sounder (SSG03)

•Work Voltage: 12/24VDC
•Work Current: 100mA-150mA
•Flash Intencity:≥1.2WS Flash Period:≤1.0S
•Provenience of sound alarm:1.Ambulance sound 2. Sound of police car 3.Sound of fire truck
•Audio Alarm:≥110dB
•Dimensions:132x110x50mm

 Fire Alarm Bell (Bell6)

Fire Alarm Bell (Bell6)

•Range: DC24V
•Alarm Current Maximum 70 mA @ 24 VDC
•Alarm Sound Intensity: Minimum 95dB
•Input terminal Wire Gauge: 12 to 18 AWG
•Dimensions: Diameter 150mm, Height 45mm •Weight: Net Weight 670g, Gross Weight 720g

 Infrared Reflective Beam SD (GST102)

Infrared Reflective Beam SD (GST102)

•Operating Voltage: 15VDC-28VDC
•Sensitivity Level: Level 1: High sensitivity.
Level 2: Medium sensitivity.
•Monitoring Area: aximum monitoring area: 14*100=1400m2 Maximum width: 14m
•Length of Optical Pathway: 8m-100m
•Dimension: length: 206mm width: 95mm thickness: 95mm

 Remote LED Indicator

Remote LED Indicator

•Working voltage: 3VDC or 24VDC.
•Working current: ≤10mA.
•Flash frequency: about 80 times/min.
•Alarm indicator: LED flash in red lighting.
•Dimension: 85 x 85 x35 mm.